The LED warning sign for parking has an optically flashing and acoustic signal device and meets the SWKI guidelines for exhaust gas warning systems in underground and multi-storey car parks.
In the event of an alarm, the red LEDs installed in the upper frame of the warning light flash every second and thus illuminate the entire signal display in striking red. In addition, the signal sirens on both sides sound for 2 minutes.
Areas of application
The LED warning sign for parking is used wherever there is a danger to people due to the escape of exhaust gases CO/NO2 or other dangerous gases, and rapid evacuation is required. The optically flashing and acoustic alarm can be clearly seen and heard even from a great distance.
- Car garages / underground garages / multi-storey car parks / car silos
- Car and truck workshops
- Many other areas of application with customizable pictogram
The LED warning sign is part of a gas warning system and is often used with our CO/NO2 gas sensors or to measure car exhaust gases such as petrol exhaust gases (carbon monoxide CO) and diesel exhaust gases (nitrogen dioxide NO2) in underground car parks and garages.
Cabling
The LED warning sign is connected with a two-wire 24 V cable and is controlled via the alarm relay of a gas control panel. We recommend using it with our ME 15, ME 18 or ME 20 panels, but it can also be used with other products with alarm relay outputs.
Installation
The LED warning sign impresses with its simple and unbreakable installation. It is usually mounted on the ceiling with the two supplied eyebolts. Due to its flexible suspension and thanks to the robust plexiglass, it will not be damaged even under heavy loads, such as a car roof touching. The mounting height can be defined at any height with chains and is therefore clearly visible from anywhere if the correct height is selected.
Dimensions
Technical Specifications
| Dimensions BxHxT | 600 x 140 x 15 mm | without siren |
| Weight (without cable) | 1,100 g | |
| Material | Clear plexiglass | frame: aluminum |
| Installation | 2 x eyebolts 4 mm | distance: 500 mm |
| Flashing speed | 0.5 Hz (1s ON / 1s OFF) | red LEDs |
| Siren volume | 2 x 90 dB @ 1 m / 24 VDC | |
| Power supply | 24 VDC ± 20% | |
| Power output | ca. 2.3 W | max. 95 mA / 24 VDC |
| Alarm display | Two-sided LED red | white pictogram |
| Connector | Plug 5.5 mm | with bayonet lock |
| Connection cable | 1.8 m, 2 x 0.5mm2 | included |
| Ambient temperature | -10…+40 °C | |
| Humidity | 20…98 % rF | non-condensing |
| Mounting height | Ceiling | varying height with chains |
| Conformity | according to SWKI guidelines | |
| Pictogram | Laser engraving | customizable |
on the bus of the gas control panel
